Installing the Printer Driver in a Network Environment
9
1
Note
❒ If the printer cannot obtain its IP address from a DHCP server, install
Smart Organizing Monitor and specify the IP address, before installing the
printer driver.
❒ You can also use Web Image Monitor to change the IP address obtained
from a DHCP server. To access Web Image Monitor, use the IP address
printed on the test page.
Reference
For details about the installation procedure, see p.9 “Installing Smart Or-
ganizing Monitor”.
For details about Web Image Monitor, see p.37 “Using Web Image Moni-
tor”.
Installing Smart Organizing Monitor
Smart Organizing Monitor can be installed from the CD-ROM provided with
this printer.
Important
❒ If you want to specify the printer's IP address manually, or manage several
different printer models, you must install Smart Organizing Monitor sepa-
rately for each printer model.
❒ If the printer is obtaining its IP address automatically from a DHCP server,
you do not need to install Smart Organizing Monitor separately. Proceed to
p.11 “Installing the printer driver” and install the printer driver.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [Smart Organizing Monitor].
E Select a language for Smart Organizing Monitor, and then click [Next >].
The [Smart Organizing Monitor Setup] dialog box appears.
F Click [Next >].
The software license agreement appears.
G After reading the agreement, click [Yes].
The [Select Destination Folder] dialog box appears.
H Click [Next >].
Click [Browse...], if you want to change the destination folder.
To Next Page
Loading...
