Ricoh SP 3400N - Setting up Options

Mac OS X Configuration
84
7
Setting Up Options
Use this procedure to configure the printer's options.
A Start [Printer Setup Utility].
Under Mac OS X 10.5, start [System Preferences] and click [Print & FAX].
Under Mac OS X 10.3, click [Print & FAX] in [System Preferences], and then click
[Set Up Printers...].
Under Mac OS X 10.2.8, start [Print Center].
The printer list appears.
B Select this printer.
• Mac OS X 10.5
Click [Options & Supplies...].
• Mac OS X 10.4
Click [Printer Setup...], and then proceed to step 4.
• Mac OS X 10.3 or lower
Click [Show Info].
C Select [Installable Options] or [Driver].
D Select the option you want to set up, and then select an appropriate setting
for it.
E Click [Apply Changes] or [OK].
F Exit [Printer Setup Utility].
Note
❒ If the option you want to select is not displayed, PPD files may not be
set up correctly. To complete the setup, check the name of the PPD file
displayed in the dialog box.