Monitoring and Configuring the Printer
46
4
Configuring the Network Application Settings
Click the [Network Application] tab on the network settings page to configure the
network application settings.
❖ Network Print Settings
❖ mDNS Setting
Item Description
IPP Select to enable network printing using Internet
Print Protocol (via TCP port 631/80).
FTP Select to enable network printing using an
embedded FTP server in the printer (via TCP
port 20/21).
RAW Select to enable network raw printing.
Port # Enter the TCP port number to use for raw
printing. The valid range is 1024 to 65535,
except 53550 (default is 9100).
LPR Select to enable network printing using
LPR/LPD (via TCP port 515).
Item Description
mDNS Select to enable Multicast DNS (via UDP port
5353). If disabled, the item below cannot be
configured.
Printer Name Enter the name of the printer. Can contain up
to 32 characters.
To Next Page
Loading...
