Using Web Image Monitor
51
4
Configuring the SMTP Settings
Click the [SMTP] tab on the network settings page to configure the SMTP settings.
❖ SMTP Settings
Item Description
Primary SMTP/POP3 Server Enter the IP address or host name of the
SMTP/POP3 server. Can contain up to 32
characters.
Port Number Enter the port number for SMTP (1 to 65535).
Authentication Method Select an authentication method from the
following:
[Anonymous]: The user name and password are
not necessary.
[SMTP Authentication]: The printer supports
NTLM and LOGIN authentication.
[POP before SMTP]: The POP3 server is used for
authentication. The same server as the SMTP
server is used as the POP3 server.
User Name Enter the user name for logging in to the SMTP
server. Can contain up to 32 characters.
Password Enter the password for logging in to the SMTP
server. Can contain up to 32 characters.
System Admin E-mail Enter the system administrator’s e-mail ad-
dress. This address is used as the sender's
address of e-mail messages sent from this
printer, such as alert e-mail messages and
Scan to E-mail notifications. Can contain up
to 64 characters.
Timeout [Seconds] Enter the number of seconds the printer waits
before considering an SMTP operation to have
timed out (1 to 999).
To Next Page
Loading...
