• The print area may vary depending on the paper size, printer language, and printer driver
settings.
• The recommended printing area for the bypass tray is up to 432 mm (17 inches) in length in
the paper feeding direction.
• Depending on the printer driver settings, you may be able to print outside the recommended
print area. However, the actual output may not come out as desired, or a paper feed problem
may occur.
• If [Edge to Edge Print] is enabled, you can print by reducing the margins on the left, right, and
bottom edges in relation to the feed direction to 0 mm, and those on the leading edge up to
2.7 mm. For details, see "Print Settings", Operating Instructions.
2. Loading Paper
36
To Next Page
Loading...
