Problem Cause Solution
White stripes appear on the
OHP.
Fragments of paper are stuck to
the OHP.
Use a dry cloth to wipe any
paper fragments off the back of
the OHP.
Additional Troubleshooting
Problem Causes Solutions
Printed pages fall off of the
output tray.
Paper may curl depending on the
paper size, type, or printing
conditions.
• Extend the extension tray
of the output tray.
• Load paper upside down
in the paper input tray.
• Remove the printed
paper one by one. When
printing multiple pages
continuously, lower the
envelope lever.
• When printing is
performed with the
envelope lever lowered,
a warning message
appears. To turn off the
message, set [Envelope
Lever Alert] to [Do not
Display]. For details
about the setting item,
see "Quality
Maintenance",
Operating Instructions.
Other Printing Problems
83
To Next Page
Loading...
