4. Select [Paper Type: (tray name)] Press [OK]
5. Select [Envelope] Press [OK]
6. Press [Escape]
7. Select [Maintenance] Press [OK]
8. Select [General Settings] Press [OK]
9. Select [Envelope Setting] Press [OK]
10. Select the source tray for which you want to change the paper thickness Press [OK]
11. Select the paper thickness Press [OK]
• For details about the envelope types that can be loaded in each tray, see page page 28 "Paper
Size Specifications" and page 32 "Paper Type Specifications".
• For details about how to load envelopes, see page 46 "Loading Envelopes".
• Configure the paper settings appropriately using both the printer driver and the control panel. For
details about paper settings using the printer driver, see page 49 "Printing on Envelopes with
Windows (PCL 6/PostScript 3)", page 50 "Printing on Envelopes with Windows (PCL 5e)", or
page 50 "Printing on Envelopes with Mac OS X".
2. Loading Paper
54
To Next Page
Loading...
