Ricoh SP 6430DN - Printing Problems

Message Cause Solution
"HDD not installed." The printer received a stored
job file but no hard disk is
installed.
Install a hard disk.
"I/O buffer overflow." An input buffer overflow
occurred.
• Select [Font Priority] for
[Memory Usage] in
[System].
• In [I/O Buffer] under the
[Host Interface] menu, set
the maximum buffer size to
a larger value.
• Reduce the number of files
being sent to the printer.
"Insufficient Memory." A memory allocation error
occurred.
PCL 6
Select a lower resolution
on the printer driver. For
details about how to
change the resolution
setting, see the printer
driver Help. On the printer
driver's [Detailed Settings]
tab, click [Print Quality] in
"Menu:", and then select
[Raster] in the "Vector/
Raster:" list. In some cases,
it will take a long time to
complete a print job.
PCL 5e, PostScript 3
Select a lower resolution
on the printer driver. For
details about how to
change the resolution
setting, see the printer
driver Help.
"Memory Retrieval Error." A memory allocation error
occurred.
Turn off the printer, and then
turn it on again. If the message
appears again, replace the
SDRAM.
3. Troubleshooting
68