• When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the
side fences are squeezed too tightly against the paper, the edges may crease, thin paper may
wrinkle, or the paper may misfeed.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Square the paper and load it print side up.
Do not stack paper over the limit mark.
3. Align the end and side fences gently against the paper you loaded.
Make sure that there is no space between the paper and the side fences or end fence.
4. Carefully push the paper tray fully in.
2. Loading Paper
44
To Next Page
Loading...
