Print
side
Trays 1–4 Tray 3 (LCT)
Large capacity tray
(LCT)
Bypass tray
One-
sided
Two-
sided
• To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you must
specify [Letterhead] as the paper type in the printer driver's settings.
• If a print job is changed partway through printing from one-sided to two-sided printing, one-sided
output after the first print may be printed facing a different direction. To ensure all paper is output
facing the same direction, specify different input trays for one-sided and two-sided printing. Note
also that two-sided printing must be disabled for the tray specified for one-sided printing.
• For details about how to make two-sided prints, see "Printing on Both Sides of Sheets", Operating
Instructions.
2. Loading Paper
50
To Next Page
Loading...
