Types of envelopes Trays 1–4 Bypass tray
Side-opening
envelopes
• Flaps: closed
• Bottom side of envelopes:
toward the back of the machine
• Side to be printed: face up
• Flaps: closed
• Bottom side of envelopes:
toward the back of the machine
• Side to be printed: face down
When loading envelopes, select "Envelope" as the paper types using both [Tray Paper Settings] and
printer driver and specify the thickness of envelopes. For details, see "Printing on Envelopes", Operating
Instructions.
To print on envelopes that are loaded with their short edges against the machine body, rotate the print
image by 180 degrees using the printer driver.
Recommended envelopes
For information about recommended envelopes, contact your local dealer.
For details about the sizes of envelopes you can load, see page 51 "Recommended Paper Sizes
and Types".
• Load only one size and type of envelope at a time.
• The Duplex function cannot be used with envelopes.
• To get better output quality, it is recommended that you set the right, left, top, and bottom print
margin, to at least 15 mm (0.6 inches) each.
• Output quality on envelopes may be uneven if parts of an envelope have differing thicknesses. Print
one or two envelopes to check print quality.
• Printed sheets are delivered to the internal tray even if you specified a different tray.
• Flatten out prints if they are creased or curled.
• Check the envelopes are not damp.
• High temperature and high humidity conditions can reduce print quality and cause envelopes to
become creased.
• Depending on the environment, printing on envelopes may wrinkle them even if they are
recommended.
Recommended Paper
59
To Next Page
Loading...
Need help?
General
Weight and Dimensions
