Problem Cause Solution
The function does not run or
cannot be used.
The function cannot be
performed while the Address
Book is being backed up
from Web Image Monitor or
other tools running on the
computer.
Wait a while. When the Address Book
backup is complete, the function will
be performed.
Paper is bent. Paper may be bent when it is
ejected from the finisher
upper tray.
Change the output tray to the finisher
shift tray.
• There are times when images might not turn out as you want because of paper type, paper size, or
paper capacity problems, use the recommended paper. For details about recommended paper,
see page 51 "Recommended Paper Sizes and Types".
3. Troubleshooting
72
To Next Page
Loading...
