Energy Saver Mode
Item Description
Energy Saver Mode 1 Select [Active] to set the printer to enter Energy Saver mode 1 if the printer
has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
Energy Saver Mode 2 Select [Active] to set the printer to enter Energy Saver mode 2 after the
period of time specified for [Waiting Time (1-240)] is passed (1 to 240
minutes).
The printer consumes less power in Energy Saver mode 2 than in Energy
Saver mode 1, but it takes longer to recover from Energy Saver mode 2
than from Energy Saver mode 1.
• The printer recovers from Energy Saver mode when it receives a print job or when any key on the
printer is pressed.
6. Monitoring and Configuring the Printer
106
To Next Page
Loading...
Need help?
General