Energy Saver 1
Sets the printer to enter Energy Saver mode 1 if the printer has been idle for about 30 seconds. It
takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver
mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2.
Default: [Off]
• Off
• On (30 seconds)
Energy Saver 2
Sets the printer to enter Energy Saver mode 2 after the period of time specified for this setting is
passed. The printer consumes less power in Energy Saver mode 2 than in Energy Saver mode 1,
but it takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
Default: [On] (10.1 minutes)
• On (1 to 240 minutes, in 1 minute increments)
• Off
B&W Page Detect
Sets the printer to print all monochrome pages in monochrome mode even if color printing is
specified.
Default: [On]
• On
• Off
Restore Default
Resets the printer settings to their factory-set defaults.
Prt. Err.Report
Sets the printer to print an error page when the printer detects a printer or memory error.
Default: [Off]
• On
• Off
BW Prt Priority
Sets the printer to suppress the consumption of color toner when printing black-and-white pages.
Also, the amount of color toner consumed during warm-up time for maintenance will also be
lowered.
Default: [Off]
• Off
• On
System Menu
59
To Next Page
Loading...
