Ricoh SP C242DN - Page 64

• IPsec
Selects whether to enable or disable IPsec.
Default: [Off]
• Off
• On
• MAC Address
Check the MAC address.
• IPv4 Config.
• DHCP
Selects whether to set the IPv4 address, subnet mask, and default gateway address
automatically or manually.
Default: [Active]
• Active
• Inactive
• IP Address
Specifies the IPv4 address.
When [DHCP] is set to [Active], the IP address cannot be changed.
To change it, set [DHCP] to [Inactive].
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Subnet Mask
Specifies the subnet mask.
When [DHCP] is set to [Active], the subnet mask cannot be changed.
To change it, set [DHCP] to [Inactive].
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Gateway Address
Specifies the gateway address.
When [DHCP] is set to [Active], the gateway address cannot be changed.
To change it, set [DHCP] to [Inactive].
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• IP Addr. Method
5. Making Printer Settings Using the Control Panel
62
5