Restricting Machine Functions According to
User
You can set the machine to require a user code when someone tries to use certain machine functions. For
details about configuring the user restriction settings, see page 37 "Restricting Machine Functions
According to User".
• This function is available for the Type 2 model only.
• To print jobs that require authentication you can use only the PCL printer driver. Printing such jobs
from the PostScript 3 printer driver is not possible.
Using Web Image Monitor, enable user restriction for all or some of the functions listed below, and then
register users who can use those functions.
• PictBridge printing
• Printing (both color and black-and-white)
• Color printing
For each user, you can specify which functions are available upon authentication. Up to 30 users can be
registered.
• For details about configuring the user restriction settings, see page 37 "Restricting Machine
Functions According to User".
5. Configuring the Machine Using Web Image Monitor
112
To Next Page
Loading...
