1. Front Cover Open Lever
To open the front cover, pull this lever on the right side of the machine.
2. Cable Cover
Remove this cover when connecting cables to the machine.
3. Ethernet Port
For connecting the machine to the network using a network interface cable.
4. USB Host Interface
Use a USB cable to connect the digital camera to the machine. You can print images directly from a digital
camera, without having to connect to a computer.
5. USB Port
For connecting the machine to a computer using a USB cable.
6. Power Socket
For connecting the power cord to the machine.
7. Rear Cover
Remove this cover when loading paper longer than A4 in Tray 1.
Guide to Components
19
To Next Page
Loading...
