Message Explanation Recommended Action
Move Env. Lever The fusing unit levers are not
positioned correctly.
When printing on an envelope,
check that the left and right
levers have been lowered to the
envelope mark.
When printing on paper, check
that the left and right levers have
been raised to the plain paper
mark.
Cover Open The top or front cover is open. Open and then close the top or
front cover.
Controller FW Download failed Controller FW could not be
downloaded.
Turn off the main power, turn it
back on, and then download
the controller FW again.
If the download fails again,
contact your sales or service
representative.
Incorrect Tnr: # Irregular toner # (Black,
Magenta, Cyan or Yellow) is
set.
Replace the toner to an
appropriate one. See
page 129 "Replacing the Print
Cartridge".
If the error message appears
even though the toner cartridge
is attached correctly, use a dry
cloth to wipe the part of the
toner cartridge that is in contact
with the machine.
Load Paper # The indicated tray # (1, 2,
bypass) is out of paper.
Load paper into the indicated
paper tray.
See page 54 "Loading Paper".
Memory Overflow This error occurs when FW
memory is not enough to save
the printing page.
Reduce the size of the data, and
then try the operation again.
Error & Status Messages on the Control Panel
173
To Next Page
Loading...
Need help?
General
Weight and Dimensions
