5. There are three upright pins on the optional paper feed unit. Align them with the holes on
the underside of the machine, and then carefully lower the machine.
6. After installing the optional paper feed unit, print the configuration page to check the
device configuration.
If it is installed properly, "Tray 2" will appear under "Paper Input" on the configuration page.
• After installing the optional paper feed unit, select Tray 2 in the printer driver. For details, see the
printer driver Help.
• If the new device is listed in the column of configuration options, it has been properly installed.
• If the optional paper feed unit is not installed properly, try to install it again by repeating the
procedure. If the problem persists, contact your sales or service representative.
• For details about printing the configuration page, see page 86 "List/Test Print Menu".
Installing Option
27
To Next Page
Loading...
