Ricoh Toscana-P1 - Adjusting Paper Feed

Adjusting Paper Feed
Print the ‘Adjust Paper Feed Test Pattern’ and do this adjustment if you see broken horizontal lines or uneven
colors in the printouts:
1. Push [Menu], select "Maintenance", then push [#Enter].
2. Select "Adj. Paper Feed" and push [#Enter].
3. Select "Pr. Test Print" and push [#Enter]. The test pattern prints.
1. Examine the test print. Note the number of the best pattern. The best pattern is the pattern
where the horizontal lines should be perfectly flat.
2. Select "Adjustment" and push [#Enter].
3. Enter the number of the pattern you selected in Step 4 and push [#Enter]. This completes the
adjustment.
4. Push [Online] to leave the menu mode.
4. Important Procedures
48
4