6. 6. Preparing a Machine for Transport
Before Transporting
Before Transporting from Repair Center to Customer Site
Check Point Comment
Box Proper Side Up
Keep the box with the top up and bottom down. Do not tilt the box more than
45 degrees from the horizontal.
Ink in Machine
The machine can be shipped with the ink cartridges installed in the machine.
However, once the ink cartridges are installed the machine should be set up
and used within 30 days. If the machine is kept longer than 30 days, the
machine needs to be cleaned with the cleaning cartridges.
Machine Cover
Cover the machine with a plastic bag. This prevents spillage if the ink cartridges
leak.
New Ink Cartridges New ink cartridges should always be provided with a repaired machine.
Toscana P1/P1n C, M, Y, K: Medium-Size Cartridges
Piemonte P1N
C, K: Medium-Size Cartridges
M, Y: Large-Size Cartridges
Before Transporting from Customer Site to Repair Center
Check Point Comment
Box Proper Side Up
Keep the box with the top up and bottom down. Do not tilt the box more than
45 degrees from the horizontal.
Ink Collection Tank
Check the ink collection tank to confirm that it is not leaking. Insert a paper
towel between the tank and cover to prevent leakage during transport. Con-
firm that the paper towel is removed after the machine is set up.
Machine Cover
Cover the machine with a plastic bag. This prevents spillage if the ink cartridges
leak.
Ink Cartridges Return the ink cartridges to the customer.
63
To Next Page
Loading...
