Ricon S9922 - Domain Filter

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
Parameter
Details
Operation
Source Port
To set port No of data sending end,
only for “Expand” type.
Value area ：1～65535
Destination type
(only for
“Basic”)
To select IP address type of data
receiveing end. “interface”, “any” to
be selected
Selected from
DropDownList.
Destination IP
IP address of data receiving end.
(only for “custom” in “Destination
type” in “Basic”.)
Format: A.B.C.D type.
Wildcard Bits
To set the wildcard bits of data
receiving end.
(only for “custom” in “Destination
type” in “Basic”.)
Format: A.B.C.D type.
Destination Port
To set port No of data receiving end.
Only for “Expand”.
Value area ：1～65535
Step 4 Single click “save” to finish.
--END
Domain Filter
Domain filter support black list and white list. It is used to firbid PCs in LAN from visit
someb websites or allow them to visit specific webistes.
Step 1 Log on WEB GUI of S9922 4G Router.
Step 2 Click “Secutiry > Domain Filter” to open “Domain Filter” tab.