Ricon S9922 - Timing Configuration

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
Parameter
Details
Operation
Basic Config
Server IP or
Domain
Set the server IP or domain of M2M
platform.
Normal WORD type, max
64 byte.
Server Port
WMMP port No, shall be the same
with Port No of M2M platform server
Value area: 1～65535
Login Times
Max retry times of router to login
M2M platform. If login times reach
max times, the router will reboot,
M2M will initialize and login again.
Value area: 1～5
Unit: times
Heartbeat
Interval
Time interval to send heartbeat
which maintain the like with M2M
platform server. The heartbeat
includes the network status info
which will update the network info of
the M2M platform.
Value area: 1～65535
Unit: seconds
Retry Times
There is a retry mechanism for
package exchange between router
and M2M platform. When exchange
times reach retry times, router will
judge the exchange fails and usually
no operation will be made.
Value area: 1～5
Unit: seconds
Task Failure
Time
The time to judge an exchange fails,
if an exchange uses time which
exceeds the “task failure time”,
router will judge the exchange fails
and will retry to send the exchange.
Value area: 1～65535
Unit: seconds
Step 4 Single click “save” icon to finish the configuration.
---END
5.3.5 Timing configuration
This application is to control the online time of the router to better manage network
and save 3G/4G flow. S9922 can add several online period as per the user’s
requirement (e.g. hours of some day). in addition, this application can support to
begin some tasks at a time point (e.g redial or reboot at 00:00). Max 10 tasks.