For the most up to date documents, bike models, additional information, instructional videos,
And more visit us at Ride1UP.com
14
5. E-bike Basics & Care
5.1 E-bike Basics:
Your Prodigy e-bike will arrive with an LCD display installed. The top button on the backside of the display
turns on and off the bike. Simply hold the button down.
• It is best practice, for safety, to only turn on your electric bike once you have lifted your leg over the
bike and are straddling the frame. You should turn it on before you begin riding, but only once you
are ready to ride.
• It is also best to turn off the bike when you are done riding after you dismount from the seat, but
before you lift your leg over the bike to get off. If you stop to look at something or talk with someone,
please turn off your bike for safety.
• Turning it on and off as described above will minimize the chance of the bike accelerating
unintentionally.
• The + button increases pedal assist and the – button decreases pedal assist and can be set to off
if you press the – button when on low.
• The headlight is turned on by holding Light Key on the bottom of the display.
• A quick backpedal or slight engagement of the brake lever instantly stops the motor. You can adjust
the sensitivity of the cadence sensor and other pedal assist settings by referring to the LCD manual.
We also have videos on our website and YouTube channel guiding you through this process.
NOTE: ◆ DO NOT CHARGE YOUR BATTERY WHEN THE BATTERY’S TEMPERATURE OR THE SPACE IT IS
STORED IN IS BELOW FREEZZING (32 DEGREES F).
To Next Page
Loading...
