For the most up to date documents, bike models, additional information, instructional videos,
And more visit us at Ride1UP.com
2. What’s in the Box?
The RIFT will arrive fully wrapped with foam and cardboard and include the following in our Accessory Box:
Accessory Box:
• User Manual
• Ride1Up Gift
• Battery Charger
• (2) Keys
• Ride1Up Allen Wrench Set
• (2) 13/15 Double Wrenches
• 8/10 Double Wrench
• (2) Pedals – R & L
• 12mm M5 Screws
• 34 mm M6 Screw
3. Installation Steps: Assembling Your Bike
Please scan QR Code below for RIFT Assembly Video.
3.1 Handlebar Assembly
PLEASE COMPLETE STEPS IN ORDER.
§ Ensure that the front fork is facing the correct way. The brakes near the bottom of the fork should
be on the riders left hand side.
§ Check the routing of the cables again before installing the handlebars. You may need to flip your
handlebars for proper routing.
§ Remove the stem faceplate on the headset by loosening the four screws using a 4mm allen
wrench.
§ Place the handlebars onto the stem and secure it in place by screwing back on the faceplate.
§ Tighten the 4 screws in an “X” pattern to ensure tightness is distributed evenly.
§ Do not stress, stretch, or kink your hydraulic brake line.
To Next Page
Loading...
