For the most up to date documents, bike models, additional information, instructional videos,
And more visit us at Ride1UP.com
• The battery’s charger is on the upper right.
NOTE:
◆
ALWAYS KEEP THE CHARGER PORT COVERED TO PROTECT AGAINST MOISTURE, WHICH CAN
DESTROY THE BATTERY. THIS IS ESPECIALLY IMPORTANT IF YOU LIVE IN A WET CLIMATE.
5. Charging the Battery:
WARNING
◆
DO NOT LEAVE CHARGING BATTERY UNATTENDED
The battery’s voltage is indicated by the display unit located on the handlebars. Your battery must be
charged in an ambient temperature, on a non-flammable & dry surface, away from any sources of heat,
humidity or flammable materials. Do not cover the battery while it is charging.
If you ever see a spark while charging your battery. Please inspect the charging port of the battery and
the tip of the charger. Please contact Support@Ride1UP.com and share pictures.
Follow the steps below when charging the battery:
Step 1. Turn the bike off. The LCD will be off.
Step 2. Plug the charger (which is off) into the socket and then insert the charger plug into the battery,
which is also off. Make sure the charger’s tip is not stressed or supporting the weight of the charger.
Do not wiggle the charger’s tip in the charging port of the battery.
• The red LED lights on: The battery is being charged. ( A )
• The red LED light becomes green: The battery is fully charged, and you can unplug the charger.
(Figure B)
(A) (B)
NOTE: Depending on the charge level when plugged in, it takes 3-6 hours for the battery to fully charge
when using the standard charger supplied with the bike.
To Next Page
Loading...
