声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
52
Android APP Instruction
2.1 Mobile Phone APP Installation
Only RD6012P-W supports WIFI connection. This App only supports Android 5.0
to Android 10.0 operating system, and there may be incompatibilities problems
between APP and operating system, please install and test the software before
buying the product. It will apply for location service, please agree and turn on the
location service. After downloading the mobile APP zip-file, please install the APP
from file manager. Don’t install or remove Wi-Fi module when the powered on,
otherwise it will be damaged. This instruction is made for version 1.0.9, there will be
little difference between different versions, and we do recommend you to download
the latest APP for better experience.
2.1.1 APP Download
You can download the APP in Google Play by searching “RDPower”.
You can also download the RD60XX APP zip-file in this URL:
https://drive.google.com/drive/folders/1V0l6P1sIJilN1yBOsTO9YGLVdkuO0cX9?usp=s
haring
If you cannot find the app in both ways, contact the seller to get it.
2.2 Installation Introduction
Android APP download and connection video instruction:
https://drive.google.com/drive/folders/15GfqS3vN3prvdVYOT1_yGHjkz0jHk_LO?usp
=sharing
2.2.1 APP Update
Click the APP icon, After the APP starts, it will automatically detect whether
there is a new version, and it will remind you by popping the window. You need to
check if there is a new version by manual detecting. If you download the APP from
Google Play, you need to detect new version by yourself.
2.2.2 APP Interface Display
When finish the installation and succeed in connection, it will show the main page as shown
in the picture below.
To Next Page
Loading...
