RIDGID 300 - Lubrication Procedures; Records and Verification of Understanding; Training Records; Summary of Changes

Doc # 18.47.1 – Ridgid 300 Safety Procedures
Date: 12/22/2014
Printed copies of this document are uncontrolled.
Lubrication:
Proper lubrication is essential to trouble –free operation and long life of the Power Drive
Grease main shaft bearing every 2 to 6 months depending upon amount of Power Drive use.
Grease fitting are provided on the side base, one at each end of the shaft. Use a good grade of
cup grease.
5. RECORDS/VERIFICATION OF UNDERSTANDING
5.1. Records
5.1.1 – Records should be kept by the Instructor of all students who have been trained in
the safe operation of the RIDGID 300.
6. SUMMARY OF CHANGES
Revision #
Date
Change (include section #)
Issued By
1
12/22/2014
NEW
OHS Officer
Page 11 of 11