RIDGID micro CA-25 - Description, Specifications and Standard Equipment; Description; Standard Equipment; Specifications

micro CA-25 Inspection Camera
5
gloves, and may include equipment
such as latex or rubber gloves, face shields,
goggles, protective clothing, respirators
and steel-toed foot wear.
  Practice good hygiene. Use hot, soapy
wa ter to wash hands and other ex-
posed body parts exposed to drain
contents after handling or using the
micro CA-25 In spec tion Camera to in-
spect drains and other areas that may
contain chemicals or bacteria. Do not
eat or smoke while operating or han-
dling the micro CA-25 Inspection Cam-
era. This will help prevent contamina-
tion with toxic or infectious material.
  Do not operate the micro CA-25 In-
spection Camera if operator or device
is standing in water. Operating an elec-
trical device while in water increases
the risk of electrical shock.
The EC Declaration of conformity (890-011-
320.10) will accompany this manual as a
separate booklet when required.
If you have any question concerning this
RIDGID® product:
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com or www.RIDGID.eu
to nd your local RIDGID contact point.
– Contact RIDGID Technical Services De-
part ment at rtctechservices@emer son.
com, or in the U.S. and Canada call (800)
519-3456.
Description, Specifications
and Standard Equipment
Description
The micro CA-25 Inspection Camera displays
live color video from an imaging sensor and
light source that’s connected to a 3' (90 cm)
exible cable. It can be used to look into
tight spots and beam back real-time video
to a color LCD. It comes with a
3
/
4
" (17 mm)
camera head for general use.
Specifications
Display.......................... 2.4" (60,9 mm)
Color LCD (480 x 234
Resolution)
Lighting........................ 4 Adjustable LEDs
Cable Reach................ 3' (90 cm) Fixed Cable
Waterproof to
10' (3 m) (IP67)
Camera Head.............
3
/
4
" (17 mm)
Video Output............. RCA (3' (90 cm) Cable
Included)
TV-Out.......................... NTSC
Operating Temp........ 32°F - 122°F
(0°C ~ 50°C)
Storage Temp............. -4°F - 140°F
(-20°C ~ 60°C)
Storage Humidity..... 15% ~ 85% RH
Depth of Field
(DOF).......................... 
(innity)
Power Source............ 4 x “AA”, Alkaline
or Rechargeable
Batteries
Attachments............. Hook, Magnet, Mirror
Weight......................... 1.35 lbs (0,6 kg)
Standard Equipment
The micro CA-25 Inspection Camera comes
with the following items:
 
Imager
 
 
 
 
 
Figure 1 - micro CA-25