RIDGID SP6263 - Page 14

14
Tools Needed for Assembly and Alignment
Crank
1/4" Diam. x 5/8" Long
Truss Head Screw (24)
Leveling Foot (4)
3/8" Diam. Hex Nut (8)
5/16" Diam. Hex Nut (4)
1/4" Diam. Hex Nut (24)
Arm Cap
1/4" External Tooth
Lockwasher (24)
5/16" Diam. External
Lockwasher (4)
11/32" x 11/16" x 1/16"
Washer (8)
5/16"Diam.x5/8"Long
Hex Head Screw (4)
7/16-inch Wrench
1/2-inch Wrench
5/8-inch Wrench
9/16-inch Wrench
15/16-inch Wrench
Small Hammer
Pencil
1/8" Hex Wrench
Pliers
Medium Screwdriver
Framing Square
Phillips Screwdriver
Assembly