RIDGID TS2410LS - User Manual

Your table saw has been engineered and manufactured to our high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this
product.
Thank you for buying a RIDGID® product.
OPERATOR’S MANUAL
10 in. TABLE SAW
TS2410LS
SAVE THIS MANUAL FOR FUTURE REFERENCE

Summary

RIDGID 10 in. Table Saw Operators Manual

Model TS2410 LS Overview

Safety Guidelines for Table Saw Operation

General Safety Precautions

Covers essential safety rules regarding tool knowledge, work area, personal protection, and tool maintenance.

Electrical Safety

Guidelines for safe electrical connections, including cord usage, grounding, and avoiding hazards.

Specific Cutting Safety Rules

Details specific safety measures for operations like cross cutting, ripping, and preventing kickback.

Understanding Symbols and Signals

Safety Hazard Signal Words

Defines signal words like DANGER, WARNING, and CAUTION to communicate hazard levels and potential risks.

Electrical Requirements and Grounding

Extension Cord Usage

Grounding and Power Connection

Table Saw Features and Components

Detailed Component Descriptions

Switch Assembly and Safety Lock

Describes the power switch assembly and its built-in safety feature to prevent unauthorized use.

Assembly and Setup Procedures

Unpacking and Mounting

Leg Stand Operation

Component Assembly and Alignment

Throat Plate Installation

Blade and Guard Assembly

Instructions for checking blade installation and properly installing the blade guard assembly.

Aligning Blade Guard Assembly

Steps to ensure correct alignment of the blade guard and spreader with the saw blade.

Operating the Table Saw

General Operation and Safety

Key operational warnings, safety practices, and advice on using recommended accessories.

Understanding Cuts and Kickback

Details on cut types, causes of kickback, and methods to avoid it, including using cutting aids.

Performing Basic Cuts

Guidance on cross cuts, rip cuts, miter cuts, bevel cuts, and compound cuts.

Advanced Cutting Techniques

Fence and Gauge Adjustments for Cuts

Procedures for setting rip fence indicator, using the rip fence, miter gauge, and table extension.

Specialty Cuts

Adjustments and Tuning

Blade Replacement and Arbor Nut

Setting Bevel Angles and Stops

Miter Gauge and Rip Fence Alignment

Maintenance and Servicing

General Cleaning and Lubrication

Brush Replacement Procedure

Troubleshooting Common Issues

Vibration, Fence, and Cutting Problems

Operation and Motor Troubleshooting

RIDGID TS2410LS Specifications

General

Brand	RIDGID
Model	TS2410LS
Category	Saw
Language	English