RIDGID TS2410LS - Tools Needed; Loose Parts

13
LOOSE PARTS LIST
Fig. 6
TOOLS NEEDED
The following tools (not included) are needed for assembly and adjustments:
COMBINATION WRENCH (4)
(3/8 in., 7/16 in., 1/2 in., 9/16 in.)
Fig. 5
PHILLIPS SCREWDRIVER
HEX KEYS (3)
(3/32 in., 5/32 in., 3/16 in.)
COMBINATION SQUARE
RIP FENCE
MITER GAUGE
BLADE GUARD
ASSEMBLY
SWITCH KEY
The following items are included with your table saw:
FRAMING SQUARE