…for everyday adventure
MX
ROUTINE MAINTENANCE
Electrical Component Maintenance Instructions
Lithium-ion batteries should be stored in a cool, dry, and ventilated environment, away from sources of fire and heat.
The optimal storage temperature for batteries is 10-25°C, with the best humidity being 60±25%. Batteries should be
stored at room temperature and charged to 20% to 40% of their capacity.
WARNING:
To prevent battery over-discharge, it is recommended to charge and discharge the battery once every 3
months according to the standard charging and discharging method, and then charge it to 20%~40% of its
capacity according to the standard charging method.
Brake Maintenance Instructions
Mechanical Brake Maintenance Instructions
For vehicles with short usage time, Just fine-tune the adjusting nut on the brake to adjust the braking effect to the
appropriate state;
For vehicles with longer usage time, check the wear condition of the brake pads. If the brake pads are slightly worn,
use an M5 Allen wrench to loosen the disc brake cable fixing nut, shorten the disc brake travel, tighten the fixing nut
with the M5 Allen wrench, and then adjust the braking effect to an appropriate state;
For vehicles with longer usage time and severe wear of the brake pads, it is necessary to replace the brake pads to
continue riding. To replace the front and rear disc brake pads, first remove the caliper fixing screw, use pliers to
remove the clip, remove the pin, directly remove the two brake pads along with the spring, take out the two brake
pads and the spring clip, then start installing new brake pads, attach the same model brake pads to the spring, pinch
the two brake pads together into the caliper, and follow the steps in reverse order to reinstall.
16
To Next Page
Loading...
