…for everyday adventure
MX
ROUTINE MAINTENANCE
Hydraulic Brake Maintenance Instructions
When maintaining the brake, use a special tool to unscrew the disc brake lever oil filling port screw, and then inject
oil into the oil pipe with a syringe to adjust the braking effect to an appropriate state;
If the braking performance is still not ideal after oil injection, it is necessary to replace the disc brake pads to
continue riding. Use an M5 Allen wrench to disassemble the front and rear disc brakes, remove the brake pads, then
install the same model brake pads into the disc brake, reinstall the front and rear disc brakes with an M5 Allen
wrench, adjust the disc brake to avoid friction with the disc brake rotor, and then normal riding is possible.
NOTE: Professional personnel should perform these operations.
Transmission Maintenance Instructions
When maintaining the transmission, the chain should be cleaned promptly after riding the whole vehicle and
lubricated regularly with chain oil.
Suspension System Maintenance Instructions
When maintaining the suspension system, pay attention to whether there is mud and water inside the rear shock
absorber and on the travel tube of the front fork, as mud and water can cause the rear and front shock absorbers to
stick during use.
Clean and maintain regularly according to personal usage frequency to avoid a decrease in riding comfort.
NOTE: Professional personnel should perform these operations.
17
To Next Page
Loading...
