EasyManua.ls Logo

RIEJU MX - Tire Maintenance Instructions; Whole Vehicle Appearance Maintenance; Common Fault Troubleshooting Instructions; Throttle Troubleshooting

RIEJU MX
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
…for everyday adventure
MX
ROUTINE MAINTENANCE
Tire Maintenance Instructions
Measure whether the tire pressure meets the tire label pressure; if not, adjust the pressure by inflating or deflating.
After supplementing the pressure, ensure to put on the valve cap.
Depending on the frequency of use, if the tire tread is severely worn, the tire needs to be replaced to continue riding.
Whole Vehicle Appearance Maintenance Instructions
After using the vehicle, first use a duster to remove surface dust, then wash with a water gun at low pressure, but
was top to bottom and avoid important electrical parts such as the battery compartment, motor shaft, and
controller, then dry the whole vehicle with a dry cloth and store in a dry, ventilated place.
WARNING :
Do not use pressure wash systems as this may damage both mechanical and electrical parts of the vehicle.
Damage caused by the use of pressure washing systems will not be accepted under warranty.
Common Fault Troubleshooting Instructions
Throttle Troubleshooting
If the battery is normal and the display screen lights up, then there is no fault with the display; if the display does not
light up, there may be a fault with the display or controller.
18

Related product manuals