INSTALLER
24
The boiler is delivered on a wooden pallet, suitably packed
and protected by a wooden crate. Its condition and compli-
ance with what was ordered must be checked immediately.
The specific characteristics of the product are indicated on
the outside: model, power, equipment, fuel type .If there is
a discrepancy between what was ordered and what was
received, immediately contact the local agent, warehouse
or sales service.
PRODUCT DELIVERY
OPENING
b If the installation involves a lot of moving (e.g.
to a rooftop or cellar utility room, etc.) DO NOT
REMOVE the protective wooden cage until
the boiler is at its place of installation (see the
“Handling” section on the next page).
- Remove the wooden crate (1)
- Remove the polystyrene edge protectors (2)
- Pull off the protective bag (3).
- Remove the four fixing brackets (6).
1 - Wooden crate
2 - Edge protectors
3 - Protective bag
4 - Boiler
5 - Pallet
6 - Fixing brackets
Material supplied in the bag inside the boiler:
- outdoor temperature sensor
- lifting eyebolts
- condensate siphon
- adjustable feet
b The packaging material must be carefully preserved
and, in any event, must not be abandoned, as it is a
source of potential danger.
b Keep the documentation envelope in a safe place.
Any copies requested from r may be charged
for.
To Next Page
Loading...
Need help?
General