Riello GS10D - Gas Train Accessories; Specification

SPECIFICATION
A special index guides your choice of boiler from the various models
available in the Riello 40 GSD series.
Below is a clear and detailed specification description of the product.
14
GAS TRAIN ACCESSORIES
Kit code
3010123GS10D - GS20D
Burner
Seal control kit
Seal control kit
To test the valve seals on the gas train, a special “seal control kit” is available.
Continuous ventilation kit for RMG control box
If the burner requires continuous ventilation in the stages without flame, a special kit is available as
given in the following table.
Kit code
3010094GS10D - GS20D
Burner
Continuous ventilation kit for RMG control box
Ground fault interrupter kit
A “Ground fault interrupter kit” is available as a safety device in case of electrical system fault. It is
supplied with burners with pin plug.
GS10D - GS20D
Burner Kit code
3001180
Ground fault interrupter kit
Size
DESIGNATION OF SERIES
GS10
Series: G
Optional variation: D Two stage output adjustment
D
1/230/50
Fuel : S Natural gas
Electrical supply to the system : 1/230/50 1/230V/50Hz