Riello RS 28 User Manual

Installation, use and maintenance instructions
20144599 (1) - 02/2018
Forced draught gas burners
Progressive two-stage operation
CODE MODEL TYPE
3783302 RS 28 809 T1
3784402 RS 38 810 T1
3784403 RS 38 810 T1
3784502 RS 38 810 T1
3784503 RS 38 810 T1
3784702 RS 50 811 T1
3784703 RS 50 811 T1
GB

Riello RS 28 Specifications

General

Brand	Riello
Model	RS 28
Category	Indoor Fireplace
Language	English

Summary

Information and General Warnings

Safety and Prevention

Introduction and Personnel Training

General safety introduction and emphasis on qualified personnel training.

Technical Description of the Burner

Technical Data

Burner Description and Components

Installation

Safety and Preliminary Checks

Critical safety instructions and pre-installation checks.

Boiler Preparation and Positioning

Combustion Head Adjustment

Gas Supply and Connections

Electrical Connections

Start-up, Calibration, and Operation

Initial Safety and Adjustments

Essential safety notes and preliminary adjustments before burner ignition.

Burner Ignition and Output Calibration

Procedures for igniting the burner and calibrating its output stages.

Servomotor and Pressure Switch Adjustments

Steps for adjusting the servomotor and pressure switches.

Burner Operation and Diagnostics

How the burner operates and how to diagnose start-up issues.

Start-up Cycle Diagnostics

Maintenance

Safety and Maintenance Programme

Crucial safety instructions and recommended maintenance schedule.

Faults - Possible Causes - Solutions

Troubleshooting Guide by Signal

A guide to identifying and resolving common burner faults using signal codes.