Riello GS10D - Product Specification

Burner
Monoblock, gas burners, completely automatic, with two stage settings fitted with:
- Fan with forward curve blades
- Cover lined with sound-proofing material
- Air damper, completely closed in stand by, driven by an electric servomotor
- Air damper with 1st and 2nd stage adjustement
- Single phase electric motor 230 V, 50 Hz
- Combustion head fitted with:
- stainless steel head cone, resistant to high temperatures
- ignition electrodes
- ionisation probe
- gas distributor
- flame stability disk
- Adjustable air pressure switch, with graduated selector, to guarantee burner lock out in the case
of insufficient combustible air
- Protection filter against radio interference
- IP 40 electric protection level.
Gas train
Fuel supply line in the Multibloc configuration, fitted with:
- Filter
- Pressure stabiliser
- Minimum gas pressure switch
- Safety valve
- Two stage working valve with ignition gas output regulator.
Approval:
- EN 676 standard.
Conforming to:
- 90/396/EEC (gas)
- 73/23/EEC (low voltage)
- 89/336/EEC (electromagnetic compatibility)
- 92/42/EEC (efficiency)
- 98/37/EEC (machines).
Standard equipment:
- Insulating gasket
- Screws and nuts for fixing the flange to the boiler
- 7-pin plug
- 4-pin plug
- Hinge
- Cable grommet
- Instruction handbook for installation, use and maintenance
- Spare parts catalogue.
Available accessories to be ordered separately:
- Extended head kit
- End cone with turbolator disk
- Town gas kit
- LPG kit
- Interface adapter kit
- 7-pin plug kit
- Ground fault interrupter kit
- Continuous ventilation kit for RMG control box
- Seal control kit.
PRODUCT SPECIFICATION
AVAILABLE BURNER MODELS
GS10D 1/230/50
GS20D 1/230/50
15