Riello RDB2.2R BG1 BLU 21 - Operating Programme

20141254
22
GB
Start-up, calibration and operation of the burner
6.8 Operating programme
Normal operation
Lockout due to extraneous light during pre-purging
Lockout due to ignition failure
Key (Fig. 17 - Fig. 18 - Fig. 19)
F Flame sensor
HT Heat request thermostat
ID Ignition device
K Enabling switch thermostat for start up after preheating
FM Fan motor
PH Heater
V1 Oil valve
LED Reset button LED colour
t1 Standby time
t2 Time for checking initialisation
t3 Pre-purging time
t3i Pre-ignition time
t3l Checks for extraneous light during pre-purging
t4i Total ignition time
t4l Reaction time to achieve safety shut-down due to flame
failure
t5i Post-ignition time
tpp Post-purging time
ts Safety time
Flame loss during operation (Recycle: max. 3 attempts)
Green
blink
Orange
blink
Green blink
Green
Lockout
Green
blink
Orange
blink
Green blink
Green
POWER SUPPLY
Fast red
Signal not requested
Fig. 17
link
F
LED
t
2
t
1
HT
FM
ID
V1
P
M
t
3
l
PH
K
t
s
20083033
Lockout
Green
blink
Red
Red, green blink
Orange blink
POWER SUPPLY
Fi 18
Fig. 19
Red
Green
blink
Orange
blink
POWER SUPPLY
Green
blink
Lockout
20076737
D11374