BURNER RTQ 3S ACCESSORIES KIT
MODEL CODE 448 511 575 639 766 896 1100 1300 1600 2100 2400
BURNER
PLATE
LONG
HEAD
GAS
TWO STAGE
RS 50 t.l. 3784703 • •
RS 70 t.l. 3785103 • •
RS 100 t.l. 3785303 • • •
RS 130 t.l. 3785503 • •
MODULATING
RS 50/M MZ t.l. 3781622 • •
RS 70/M t.l. 3789611 • •
RS 100/M t.l. 3789711 • • • •
RS 130/M t.l. 3789811 • •
RS 190/M t.c. 3787623 • 3010443
RS 250/M MZ t.c. 3788411 •
GAS 9 P/M t.l. 3754038 •
b See the instruction manual provided with the burner for further information on:
- Burner installation
- Electrical connections
- Burner adjustments.
b 1 - Long heads and burner plates are required for the correct installation and coupling of the burners.
2 - If a two stage burner is installed, 1st stage heat input must not be less than 70% of total heat input. With
liquid fuel burners equipped with 2 nozzles, it is therefore important to choose the correct first stage nozzle.
b To assemble/disassemble the burners equipped with recirculation tube, it might be necessary to remove the latter
before carrying out such operations (strictly comply with the use and maintenance manual of the burner).
Recommended gas burners
RECOMMENDED GAS BURNERS
To Next Page
Loading...
