Rigol DG1000 Series - Page 18

RIGOL DG1000 Command System
Programming Guide for DG1000
2-6
DC offset) selected by the
FUNCtion:USER
command via CH1.
Explanations  If the parameters you set are less than three, the sequence
would be: <frequency>, <amplitude>, <offset>.
 The default units of <frequency>, <amplitude> and <offset>
are Hz, Vpp and V
DC
respectively.
Example APPL:USER 1000,5.0,-1.5
8. APPLy?
Syntax APPLy?
Function Query the current configuration
of CH1 and the type of wave
outputted.
Return Value The query returns a character string enclosed in double quotation
marks, including function, frequency, amplitude and offset. Such as,
CH1:"SIN,1.000000e+03,5.000000e+00,-1.500000e+00"
9. APPLy:SINusoid:CH2
Syntax APPLy:SINusoid:CH2 [<frequency>[,<amplitude>[,<offset>]]]
Function Generate a sine wave with specific frequency, amplitude and DC
offset via CH2.
Explanations  If the parameters you set are less than three, the sequence
would be: <frequency>, <amplitude>, <offset>.
 The default units of <frequency>, <amplitude> and <offset>
are Hz, Vpp and V
DC
respectively.
Example APPL:SIN:CH2 1000,5.0,-1
10. APPLy:SQUare:CH2
Syntax APPLy:SQUare:CH2 [<frequency>[,<amplitude>[,<offset>]]]
Function Generate a square wave with specific frequency, amplitude and DC
offset via CH2. This command would overwrite the current duty cycle
setting and select 50% automatically.
Explanations  If the parameters you set are less than three, the sequence
would be: <frequency>, <amplitude>, <offset>.
 The default units of <frequency>, <amplitude> and <offset>
are Hz, Vpp and V
DC
respectively.
Example APPL:SQU:CH2 1000,5.0,-1
11. APPLy:RAMP:CH2