Parameter
Units
Supported
Default Unit
Frequency MHZ/KHZ/HZ/UHZ HZ
Amplitude VPP/MVPP/VRMS
/MVRMS/DBM
VPP/VRMS/DBM
(depend on the parameter
currently to be set)
Offset/High Level/Low
Level
V/MV V
Time MS/KS/S/US/NS S
Phase ° °
Duty Cycle/Modulation
Depth etc.
% %
● MHZ is equivalent to mHz.
● MVPP is equivalent to mVpp, MVRMS is equivalent to mVrms, MV is equivalent to
mV.
● MS is equivalent to ms.
Note: this manual takes DG4162 as an example to illustrate the ranges of
parameters in the commands.
To Next Page
Loading...
