Chapter 1 Disassemble and Assemble RIGOL
DG4000 Service Guide
1-3
Disassemble the Rear Cover
Figure 1-2 Disassemble the Rear Cover
Parts Explanations:
① 2 screws (M3*10 torx pan head) at the handle groove.
② 2 screws (M3*8 torx pan head assembly) at the supporting legs.
Dsiassemble Steps:
1. Remove the 2 screws (①) at the handle groove using the screw driver (T10).
2. Remove the 2 screws (②) at the supporting legs using the screw driver (T10).
3. Take off the rear cover gently.
①
①
Rear Cover
②
②
Handle
To Next Page
Loading...
