RIGOL Chapter 1 Disassemble and Assemble
1-8
DG4000 Service Guide
Disassemble the Display and Keyboard Board
Figure 1-7 Disassemble the Display and Keyboard Board
Part Explanations:
① 4 screws (M3*6 torx pan head) fixing the display and front metal panel.
② 4 screws (M3*6 tors countersunk head) fixing the keyboard board and the front
metal panel.
Disassemble Steps:
1. Disconnect the display cable and keyboard board cable from the main board.
2. Remove the 4 screws (①) fixing the display and front metal panel using the screw
driver (T10).
3. Remove the 4 screws (②) fixing the keyboard board and front metal panel using
the screw driver (T10).
Display
①
①
①
①
Keyboard Board
②
②
②
②
To Next Page
Loading...
