Rigol DG4202 - Page 225

Chapter 13 Specifications RIGOL
DG4000 User's Guide
13-3
Overshoot Typical (1Vpp)
<3%
Jitter (rms) Typical (1Vpp)
≤5MHz 2ppm+500ps
>5MHz 500ps
Arb
Waveform Length 16k points
Vertical Resolution 14bits
Sample Rate 500MSa/s
Minimum Rise/Fall
Time
Typical (1Vpp)
<5ns
Jitter (rms) Typical (1Vpp)
≤5MHz 2ppm+500ps
>5MHz 500ps
Interpolation
Method
Off, Linear
Edit Method Edit Points, Edit Block
Harmonic
Harmonic Order ≤16
Harmonic Type Even, Odd, All, User
Harmonic Amplitude can be set for all harmonics
Harmonic Phase can be set for all harmonics
Output Characteristics
Amplitude (into 50 Ω)
Range ≤20MHz: 1mVpp to 10Vpp
≤70MHz: 1mVpp to 5Vpp
≤120MHz: 1mVpp to 2.5Vpp
≤160MHz: 1mVpp to 1Vpp
≤20MHz: 1mVpp
to 10Vpp
≤70MHz: 1mVpp
to 5Vpp
≤100MHz:
1mVpp to
2.5Vpp
≤20MHz:
1mVpp to 10Vpp
≤60MHz:
1mVpp to 5Vpp
Accuracy Typical (1kHz Sine, 0V Offset, >10mVpp, Auto)
± 1% of setting ± 2mVpp
Flatness
(relative to 1kHz
Typical
≤10MHz:
Typical
≤10MHz:
Typical
≤10MHz:
Typical
≤10MHz: