Rigol DG800 Series - Page 21

Chapter 2 Command System RIGOL
DG800 Programming Guide 2-7
:COUN? /*Queries the status of the frequency counter and the query returns OFF.*/
:COUN 1 /*Enables the frequency counter function.*/
:COUN? /*Queries the status of the frequency counter and the query returns RUN (the default
operating status).*/
:COUN STOP /*Sets the operating status of the frequency counter to "STOP".*/
:COUN? /*Queries the status of the frequency counter and the query returns STOP.*/
:COUNter:STATIstics:CLEAr
Syntax
:COUNter:STATIstics:CLEAr
Description
Clears the statistics results.
Remarks
 This command is only valid when the statistical function of the frequency counter is enabled
(
:COUNter:STATIstics[:STATe]).
 The statistics results are cleared automatically when the statistical function of the frequency counter is
disabled.
:COUNter:STATIstics[:STATe]
Syntax
:COUNter:STATIstics[:STATe] {ON|1|OFF|0}
:COUNter:STATIstics[:STATe]?
Description
Enables or disables the statistical function of the measurement results of the frequency counter.
Queries the on/off status of the statistical function of the measurement results of the frequency counter.
Parameter
Name
Type
Range
Default
{ON|1|OFF|0}
Bool
ON|1|OFF|0
OFF
Return Format
The query returns ON or OFF.
Example
:COUN:STATI ON /*Enables the statistical function of the measurement results of the frequency
counter.*/
:COUN:STATI? /*Queries the on/off status of the statistical function of the measurement results of the
frequency counter and the query returns ON.*/