Rigol DM3061

RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
2-52
2. The Data Log Trigger and Delay
To set the start condition and the delay time of Data Log.
Press  Log  Start, the interface shows below.
Figure 2- 61The Start Condition Setting Interface
Table 2- 38 The Start Condition Setting Menu Description
Function
Menu
Setting
Description
Trig
Manu
Ext
Set trigger: Manual
Set trigger: External
Delay
The time from the start of trigger to the
commence of data logging.
Save all the changes, back to a higher
level menu.