RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
External Triggering
is used to set the parameter which initiates the triggering function. It requires to
set the following parameter: the Rise edge, the Fall edge, HiLev (high level) and
LoLev (low level). Press Done to start the external triggering, the keys and
on the front panel will be off to indicate the instrument using external triggering
mode.
Press Ext, the display shows:
Figure 2- 22 The Interface of the External Triggering
Triggering modes: the rise edge, the fall edge, high level and low level.
To Next Page
Loading...
