RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
REC#
In Stop menu, press REC# button to set the sample points of Data Log, stop the
sampling when reach the set number.
Figure 2- 65
The setting scope of REC# is from 1 to 2M points. The default setting is 1,000 points.
Infinity
In Stop menu, press Infinity button to set the Data Log don‟t stop sampling until you
force* to stop the sampling.
Figure 2- 66
*NOTE:
Press button and hold more than two second to stop the sampling of Data Log.
This operation is applied to any Data Log stop mode.
To Next Page
Loading...
